Results 1 to 9 of 9

Thread: Chain slider on JMC swingarm?

  1. #1
    Join Date
    Nov 2012
    Location
    Bracknell Berkshire
    Posts
    1,365

    Chain slider on JMC swingarm?

    Just wondering if anyone has one on theirs? Recently got hold of one but it has no mounting holes for a chain slider, trying to figure out whether they need one or not. Can see a couple of very slight marks on it where the chain has supposedly swung around but nothing very deep. Trying to figure out what could be used the ZRX one won't go on it as the pivot tube size seems completely different. Think I'd rather have one as a precaution, have got a bracket welded on for the chain guard.

  2. #2
    Join Date
    Jun 2005
    Location
    Farnborough Hants
    Posts
    9,126

    Re: Chain slider on JMC swingarm?

    My JMC has a plastic angle bonded onto the lower brace to stop the chain hitting it.
    Would be easy to do yourself.
    TPB-Founder member HCW
    Champagne ideas on beer money

  3. #3
    Join Date
    Nov 2012
    Location
    Bracknell Berkshire
    Posts
    1,365

    Re: Chain slider on JMC swingarm?

    Nothing on the top rail then as where the standard one would normally be?

  4. #4
    Join Date
    Jun 2014
    Posts
    9,294

    Re: Chain slider on JMC swingarm?

    Mine is also just as Pal describes his and IIRC there is quite a way from the bottom of the chain to top of the swinger (assuming you adjust it of course )

    Very more likely to hit the lower brace i would suggest.
    What Goes Around..........!!!

  5. #5
    Join Date
    Nov 2012
    Location
    Bracknell Berkshire
    Posts
    1,365

    Re: Chain slider on JMC swingarm?

    Hmm so maybe not the problem I thought it may be.

  6. #6

    Re: Chain slider on JMC swingarm?

    Quote Originally Posted by ZRXNige View Post
    Mine is also just as Pal describes his and IIRC there is quite a way from the bottom of the chain to top of the swinger (assuming you adjust it of course )

    Very more likely to hit the lower brace i would suggest.
    That's a piece of carbon fibre off cut from the Typhoon production line

  7. #7
    Join Date
    Jun 2014
    Posts
    9,294

    Re: Chain slider on JMC swingarm?

    Quote Originally Posted by Purge View Post
    That's a piece of carbon fibre off cut from the Typhoon production line

    Im deffo swapping it with the ORP arm now
    What Goes Around..........!!!

  8. #8

    Re: Chain slider on JMC swingarm?


  9. #9
    Join Date
    Jun 2014
    Posts
    9,294

    Re: Chain slider on JMC swingarm?

    As an aside Chris, bit surprised you are fitting a shorter arm if you are still attacking the 1/4 mile?
    What Goes Around..........!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Green Web Hosting! This site hosted by DreamHost.

Click here to order your ZRXOC Merchandise