Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Wiring in an LED clock?

  1. #11
    Join Date
    Nov 2012
    Location
    Bracknell Berkshire
    Posts
    1,271

    Re: Wiring in an LED clock?

    Quote Originally Posted by z1racer View Post
    how many wires on it
    Just 2, positive and negative as well as the little sensors for the thermometer part. I'll probably try running it to the fan connector block when I get round to taking the tank off, throttle cables may need a play with anyway so reason enough to pull it.

  2. #12
    Join Date
    Jan 2010
    Location
    high peak derbyshire
    Posts
    1,057

    Re: Wiring in an LED clock?

    Quote Originally Posted by Chris'ZRX View Post
    Just 2, positive and negative as well as the little sensors for the thermometer part. I'll probably try running it to the fan connector block when I get round to taking the tank off, throttle cables may need a play with anyway so reason enough to pull it.
    if only 2 must be live all time.i would say it will be ok.will draw very little power as digital.we don't switch clocks of at home do we.i would just try it
    it's a good day when you wake up and stretch out and don't touch wood

  3. #13
    Join Date
    May 2019
    Posts
    38

    Re: Wiring in an LED clock?

    I would drop an inline fuse on the live feeds anyway. The current draw is only low, but if a wire catches or chaifes - it'll still blow. Better to lose the clock feed than a power feed to the motor

  4. #14
    Join Date
    Jun 2010
    Location
    Nr Nantwich, South Cheshire
    Posts
    118

    Re: Wiring in an LED clock?

    I made fitted a new black ZRX gauge face to a digital 52mm VDO clock from the 96 MGF, and sank it into a chrome tow ball cover.
    Made a little stainless bracket for it and wired it in. Looks stock next to the main gauges.
    It draws shag all current and would take years to flatten the battery. Backlit too.

    my gauges.jpg
    ZRX1100, H2C 750, GSXR750F, VF500F2F, VF1000RG

  5. #15
    Join Date
    Jul 2005
    Location
    Derbyshire
    Posts
    3,209

    Re: Wiring in an LED clock?

    Quote Originally Posted by Will Barber View Post
    I made fitted a new black ZRX gauge face to a digital 52mm VDO clock from the 96 MGF, and sank it into a chrome tow ball cover.
    Made a little stainless bracket for it and wired it in. Looks stock next to the main gauges.
    It draws shag all current and would take years to flatten the battery. Backlit too.

    my gauges.jpg
    Like that looks very good

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Green Web Hosting! This site hosted by DreamHost.

Click here to order your ZRXOC Merchandise