Results 1 to 6 of 6

Thread: Kendo. Wheel spacers.

  1. #1
    Join Date
    May 2009
    Location
    Nottingham
    Posts
    3,676

    Kendo. Wheel spacers.

    Kenny presume you have in the past made the spacers for fitting a ZX7R 6 inch wheel into the Rex.
    Is it the same as for the standard spacers? ie only one is different for the 11 and 12 swingers?

  2. #2
    Join Date
    Jun 2014
    Posts
    8,427

    Re: Kendo. Wheel spacers.

    Quote Originally Posted by t20p1 View Post
    Kenny presume you have in the past made the spacers for fitting a ZX7R 6 inch wheel into the Rex.
    Is it the same as for the standard spacers? ie only one is different for the 11 and 12 swingers?
    You are pissing in the wind if you want it anywhere near centred (I gave up with an Over Racing arm on an 11)


    Nigel will know (z1racer type) as he fitted said wheel (not centred )
    What Goes Around..........!!!

  3. #3
    Join Date
    Jan 2010
    Location
    high peak derbyshire
    Posts
    961

    Re: Kendo. Wheel spacers.

    as nige said i have. i just got it as far to the left i could.but had a spacer made for the disc so the caliper and tourqe arm line up with the origional mount looks a little trick as well.but wheels not in line.if i remember had the sprocket carrier machined down a bit as well
    it's a good day when you wake up and stretch out and don't touch wood

  4. #4
    Join Date
    Jan 2010
    Location
    high peak derbyshire
    Posts
    961

    Re: Kendo. Wheel spacers.

    yes i did just looked

    [IMG]IMG_0871 by Nigel Wilson, on FlickrIMG_0558 by Nigel Wilson, on Flickr[/IMG]
    it's a good day when you wake up and stretch out and don't touch wood

  5. #5
    Join Date
    Jul 2005
    Location
    Scotland (West of)
    Posts
    4,474

    Re: Kendo. Wheel spacers.

    Quote Originally Posted by t20p1 View Post
    Kenny presume you have in the past made the spacers for fitting a ZX7R 6 inch wheel into the Rex.
    Is it the same as for the standard spacers? ie only one is different for the 11 and 12 swingers?
    I may have made spacers as a one off for someone to their sizes but mainly the ones i make are as a stock replacement or to fit a 1200 wheel into an 1100 arm.

    Kendo
    Take the pieces and build them skywards !

  6. #6
    Join Date
    May 2009
    Location
    Nottingham
    Posts
    3,676

    Re: Kendo. Wheel spacers.

    Ok thanks.
    Looks like putting a 6 inch wheel in an 11 arm is a pain.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Green Web Hosting! This site hosted by DreamHost.

Click here to order your ZRXOC Merchandise